Keep real world performance numbers » History » Version 7
Ward Vandewege, 07/28/2020 07:38 PM
| 1 | 1 | Ward Vandewege | h1. Keep real world performance numbers |
|---|---|---|---|
| 2 | |||
| 3 | 6 | Ward Vandewege | h2. AWS/S3 numbers |
| 4 | |||
| 5 | Here are some benchmark numbers against AWS S3, as measured in July 2020. They were generated with the _keep-exercise_ tool in an Arvados installation with one dedicated Keepstore node (c5n.2xlarge) and one dedicated node for running _keep-exercise_ (c5n.2xlarge). The Keepstore node was backed by one S3 bucket, in a VPC with an S3 endpoint installed. Versioning, Server Access logging, Static website hosting, Object-level logging and Default encryption were disabled. Object lock, Transfer acceleration and Requester pays were also disabled. There were no Active notifications. Each test consisted of 4 one minute runs, which were averaged into one number. The tests were repeated 3 times, and of those 3 runs, the highest average speed was selected and included in the table below. |
||
| 6 | |||
| 7 | 7 | Ward Vandewege | The *goamz* driver is the default Keep S3 driver as of Arvados 2.0. In Arvados 2.1, a new S3 driver is added based on the *aws-sdk-go-v2* driver. It offers better read performance but has not had as much production use. |
| 8 | 6 | Ward Vandewege | |
| 9 | ||_. goamz |_. aws-sdk-go-v2 |_. command line| |
||
| 10 | |single thread read performance (average)|32.53 MiB/s|79.48 MiB/s|keep-exercise -repeat 4 -run-time 60s -vary-request -use-index -rthreads 1 -wthreads 1| |
||
| 11 | |single thread write performance (average)|39.75 MiB/s|41.05 MiB/s|keep-exercise -repeat 4 -run-time 60s -vary-request -use-index -rthreads 1 -wthreads 1| |
||
| 12 | |||
| 13 | When using 20 concurrent read or write threads, the numbers from both drivers are: |
||
| 14 | |||
| 15 | ||_. goamz |_. aws-sdk-go-v2 |_. command line| |
||
| 16 | |20 thread read performance (average)|585.60 MiB/s|898.93 MiB/s|keep-exercise -repeat 4 -run-time 60s -vary-request -use-index -rthreads 20 -wthreads 0| |
||
| 17 | |20 thread write performance (average)|610.40 MiB/s|688.25 MiB/s|keep-exercise -repeat 4 -run-time 60s -vary-request -use-index -rthreads 0 -wthreads 20| |
||
| 18 | |||
| 19 | h2. Historical AWS/S3 numbers |
||
| 20 | 1 | Ward Vandewege | |
| 21 | 5 | Tom Morris | |Name|Network performance|CPU|RAM|Keepstore|Data Payload Throughput|CPU load|Date tested|Tested by| |
| 22 | 4 | Ward Vandewege | |c5.9xlarge|10 Gigabit|36 cores|72 GiB|0.1.20171212165144.296aa66-1|Saturates RX and TX (1+ GiB/sec)|~4|2018-01-18|Ward| |
| 23 | 1 | Ward Vandewege | |r4.8xlarge|10 Gigabit|32 cores|244 GiB|0.1.20171212165144.296aa66-1|Saturates RX and TX (1+ GiB/sec)|~4|2018-01-17|Ward| |
| 24 | 3 | Ward Vandewege | |r4.large|"up to" 10 Gigabit|2 cores|15 GiB|0.1.20171212165144.296aa66-1|~400 MiB/sec but long periods of cap at ~90 MiB/sec||2018-01-16|Ward| |